Blast Densification of a Thick, Loose Debris Flow at Mt. St. Helen's., Washington
Numerous debris flows occurred during the 1980 eruption of Mt. St. Helen's in Washington State. The proposed location of Bridge 12 over Coldwater Creek along State Route 504 is underlain...
Modeling Settlements of an Existing Municipal Solid Waste Landfill Sideslope Using an Earthen Surcharge Pile
This paper discusses the results of a large-scale field compressibility test completed on municipal solid waste (MSW). The test consisted of surcharging the waste mass with an earthen...
Waste Minimization and Recycling by Microfiltration during Nitrocellulose Manufacturing
A plant survey was conducted to determine the amount of nitrocellulose (NC) discharged with process water from each of five sequential NC purification processes. Wastewater samples were...
Meeting 503 Regulations for Ten Biosolids Incinerators (And Associated Stories)
This paper provides an overview of the Hampton Roads Sanitation District's Part 503 regulations compliance program regarding incineration of biosolids at five of its treatment facilities....
Beneficial Use Alternatives for Water Treatment Plant Residuals
The beneficial use alternatives which are currently in practice for water treatment plant residuals and their relative advantages and disadvantages are summarized in this paper. The alternatives...
Modifying One of the Nation's Most Successful Biosolids Lime Stabilization Operations
Since 1978, the Vallejo, California, Sanitation and Flood Control District has managed a tremendously successful biosolids program consisting of lime stabilization and agricultural land...
Effect of Roughness and Thickness of Biofilms on External Mass Transfer Resistance
The effect of roughness and thickness of biofilms on the dissolved oxygen (DO) concentration boundary layer thickness (DO CBLT) and the external mass transfer process in a biofilm system...
Modeling Full-Scale Diffused Aeration Systems
The purpose of this research was to show the direct relationship of the oxygen mass transfer coefficient (KLaT)...
Reliability and Validity of Modeling Sedimentation and Debris Flow Hazards Over Initially Dry Areas
Extreme floods may inundate populated areas of a river valley that are normally dry. Two-dimensional flow analysis is a useful method for predicting the spatial and temporal behavior of...
Testing Turbine Aeration for Dissolved Oxygen Enhancement
During August of 1993 the Bureau of Reclamation tested turbine aeration for dissolved oxygen (DO) enhancement at Deer Creek Powerplant near Provo, Utah. This test required a variety of...
A Coupled GIS-Water Quality Modeling System
A modeling framework is developed which uses a geographic information system (GIS) to perform many of the time-consuming tasks needed to set up and run a general water quality model. The...
Development of Transport Model for Groundwater Planning and Management in Taipei Basin
The objective of this paper is to develop a groundwater model for contaminant transport simulation. The transport model, in conjunction with the previously developed flow model, is used...
Erosion and Deposition by Debris Flows in Mountainous Channels on North Fork Mountain, Eastern West Virginia
A study of four debris-flow impacted channels in the North Fork Mountain area of eastern West Virginia shows that the geomorphic effect of debris flows on channel morphology is variable...
Size Characteristics of Debris Flow Deposition
The size distribution of debris flow deposition is extremely wide which may contain nearly all particles from clay and colloid to boulder. Particle size and composition have very important...
An Approach to the Calculation Method of Mean Sediment Size
Mean sediment size is an important parameter expressing the characteristics of sediment. Several calculation methods of mean sediment size which are popular at present almost have some...
Macro-Roughness Effects on Stream Reaeration
The gas transfer coefficient is key to modeling dissolved oxygen levels in streams. Engineers commonly predict it as a function of mean flow depth, velocity, and slope. Large errors are...
Reservoir Sediment Removal: Hydrosuction Dredging
Hydrosuction dredging is a relatively little-known method of removing sediment deposits from reservoirs. The method is similar to traditional hydraulic dredging except the difference between...
Salinity and Dissolved-Oxygen Dynamics in a Wind-Driven Estuary
Water levels, near-surface and near-bottom salinities, and near-surface and near-bottom dissolved-oxygen concentrations were measured continuously in the Pamlico River estuary, North Carolina,...
The Art of Infrastructure
Phoenix' capital improvement plan is subtitled Our Share Environment. It requires that one percent of the capital budget go toward artistic input on all infrastructure projects:...
Quest for the Perfect Cap
Exhuming and treating wastes may not always be the most effective way to remediate a site. In some cases, in-place disposal with a protective cap offers the best protection for human health...
Return to search